Just to keep everyone in the loop, I will continue to work on uploading instructions and images as I have time. In the meantime, all of the current STLs are available!

NOTE: Additional hardware IS required for most models.

Here's a short list of hardware off the top of my head:

2U Printed Bracket - Requires 16x M3x4x5mm Brass Heatset Inserts, 4x M3x6mm (or other M3x6mm thru M3x20mm) screws per module (BHCS or SHCS, no FHCS).
1U 5.25" Drive Bay Mount (designed specifically for the Icy Dock ExpressCage MB324SP-B) - Requires 8x M3x6mm screws (BHCS or SHCS, no FHCS).
General Pi Mounts (2x Pi, 1x Pi, etc.) - Requires 4x M2.5x5 SHCS screws. If using a HAT (PoE or otherwise), standoffs and/or other length M2.5 screws may be required.
JetKVM Modules - Requires 2x M2x12 SHCS screws per JetKVM unit.
80mm Fan Panel - Requires the coarse-thread screws that the fans come with.

I am open to helping create mounts for specific models within reason, but will be releasing CAD for users to create their own mounts! The possibilities are endless!